Laboratory Report: Voltage Rectifier and Voltage Regulation Circuits
Laboratory Report Cover/Worksheet
DeVry University
College of Engineering and Information Sciences
Course Number: ECET210
ProfessorLaboratory Number: 7
Laboratory Title: Voltage Rectifier and Voltage Regulation Circuits
Submittal Date:
Objectives:
1. To analyze the characteristics of rectifying diode using theoretical, simulation, and physical construction of the circuit.
2. To analyze the characteristics of voltage regulation (zener diode and voltage regulator) using theoretical, simulation, and physical construction of the circuit.
Results:
Conclusions:
Team:
Svetliza Carlos
ECET
Name
Program
Signature
Name
Program
Signature
Name
Program
Signature
Observations/Measurements:
III. A. 1. A. Theoretical analysis of the rectifier diode:
Sketch the input and output signal waveforms. Record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Theoretical column.
CH-1 CH-2
Average Voltage = 318 mVPP
Voltage (V)
Theoretical
Simulation
Experimental
CH-1
Positive Peak
Voltage
5
5
5
Negative Peak
Voltage
-5
-5
-5
Average
Voltage
0
0
0
CH-2
Positive Peak
Voltage
4.3
4.5
4.4
Negative Peak
Voltage
0
0
0
Average
Voltage
1.37
1.35
1.36
Table 1 – Rectifier data
III. B. 2. Multisim simulation of the rectifier circuit: Insert the Multisim capture of the input CH-1 and output CH-2 waveforms here. Record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Simulation column.
III. C. 1. Online: Place a digital photo of your circuit below:
III. C. 2. Hardware circuit of the Rectifier circuit:
Measure and record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Experimental column. Either sketch the scope CH-1 and CH-2 waveforms here or insert the picture captured of the
DeVry University
College of Engineering and Information Sciences
Course Number: ECET210
ProfessorLaboratory Number: 7
Laboratory Title: Voltage Rectifier and Voltage Regulation Circuits
Submittal Date:
Objectives:
1. To analyze the characteristics of rectifying diode using theoretical, simulation, and physical construction of the circuit.
2. To analyze the characteristics of voltage regulation (zener diode and voltage regulator) using theoretical, simulation, and physical construction of the circuit.
Results:
Conclusions:
Team:
Svetliza Carlos
ECET
Name
Program
Signature
Name
Program
Signature
Name
Program
Signature
Observations/Measurements:
III. A. 1. A. Theoretical analysis of the rectifier diode:
Sketch the input and output signal waveforms. Record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Theoretical column.
CH-1 CH-2
Average Voltage = 318 mVPP
Voltage (V)
Theoretical
Simulation
Experimental
CH-1
Positive Peak
Voltage
5
5
5
Negative Peak
Voltage
-5
-5
-5
Average
Voltage
0
0
0
CH-2
Positive Peak
Voltage
4.3
4.5
4.4
Negative Peak
Voltage
0
0
0
Average
Voltage
1.37
1.35
1.36
Table 1 – Rectifier data
III. B. 2. Multisim simulation of the rectifier circuit: Insert the Multisim capture of the input CH-1 and output CH-2 waveforms here. Record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Simulation column.
III. C. 1. Online: Place a digital photo of your circuit below:
III. C. 2. Hardware circuit of the Rectifier circuit:
Measure and record the positive and negative peak voltages and average voltage for the input and output signals. Enter the data in Table 1 under the Experimental column. Either sketch the scope CH-1 and CH-2 waveforms here or insert the picture captured of the