Resolving and Determining the Percentages of Naphthalene‚ NaCl and SiO2 in a Mixture with the use of Separation Techniques Castro‚ Sarleen G.* Cid‚ John Emmanuel V.‚ Clemente‚ Christian Joy G. Group 5‚ 1CHEM‚ Department of Chemistry‚ College of Science‚ University of Santo Tomas‚ España‚ Manila‚ 1015 August 24‚ 2012 Abstract A mixture can be homogenous or heterogenous‚ depending if the mixture has been uniform throughout the mixture or not. One of the objectives is to separate C10H8‚ NaCl and
Premium Chemistry Evaporation Water
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
CHAPTER 6 MECHANICAL-PHYSICAL SEPARATION PROCESSES Introduction Separation Processes Many chemical processes materials and biological substances occur as mixtures of different components in the gas‚ liquid‚ or solid phase. In order to separate or remove one or more of the component from its original mixture‚ it must be contacted with another phase. The two-phase pair can be gas-liquid‚ gas-solid‚ liquid‚ or liquid-solid. Absorption When the two contacting phases are a gas and a liquid
Premium Gas Liquid Filters
materials we use today are actually mixtures of pure substances. The separation of these materials into their pure substances can be quite challenging. When we are discussing separations of a mixture that contains pure substances‚ it all depends on whether you can separate the substances by physical means. That means‚ utilizing each substances physical properties such as boiling point‚ melting point‚ and magnetism. Separation of a Mixture of Solids Lab Report Assistant
Premium Water Sodium Sodium chloride
devising a separation and purification scheme for a three component mixture. The overall objective is to isolate in pure form two of the three compounds. This was done using extraction‚ solubility‚ crystallization and vacuum filtration. The experiment was carried out two times‚ both of which were successful. Background Information: This experiment combined all the knowledge of the previous labs performed throughout the semester. An unknown mixture containing an organic acid or base and
Premium Solvent Solubility Ethanol
substance to their pure state. By changing the state of matter from solid to liquid and vies versus during the experiment the student will be able to see the physically means of each substance. During the experiment the student will use varies techniques and materials to separate the substances. The students will use a scale to measure the mass in grams of the substance and subtract the original total to the new total each time to obtain the net mass of the substance. The students will separate
Premium Water
Separation of a Mixture of Solids Lab: Separation of a Mixture of Solids Experiment PURPOSE The purpose of this experiment was to learn how to separate a mixture of solids. DATA | | |Data Table 1: Experiment Data | | |Grams |Percent of mixture | |Iron filings |2.2
Premium Separation process Mixture Analytical chemistry
2013 Separation of a Mixture of Solids Step 1: Separating out the Iron Mass of weighing dish: 0.7g Mass of weighing dish and mixture: 5.4g Net mass of the original mixture: 4.7g Mass of 10-cm square paper: 0.8g Mass of 10-cm square paper and iron fillings: 2.0g Net mass of iron filings: 1.2g Step 2: Separating out the Sand Mass of weighing dish: 0.7g Mass of weighing dish and dry sand: 1.7g Net mass of the dry sand: 1.0g Step 3: Separating out the Benzoic acid Mass
Premium Salt Chlorine Sodium chloride
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
Katie Arrington 09/18/2012 09/19/2012 Title: Separation of Mixtures and Solids Purpose: The purpose of this experiment was to practice the process of separating mixtures of different solids. Procedure: This experiment consisted of different processes to separate a mixture of solids into the four individual solids: sand‚ benzoic acid‚ iron fillings‚ and sodium chloride. To remove the iron fillings from the mixture I used a magnet and scanned it across the entire mixture and the magnet
Premium Separation process Evaporation Mixture