Questions and Answers
Show me, Tell me Questions and Answers
Q1) Show me how you would check that the direction indicators are working.
A1) Applying the indicators or hazard warning switch and check functioning of all indicators. (may need to switch ignition on, prompt not to start engine)
TIP- Most cars will not need to have the ignition switched on to activate the hazard switch, so it should be simple to lean into the car, switch it on, walk around the car checking all 4 main indicators (there are also indicators on the front wings and/or the door mirrors), and then lean into the car to switch off the hazard switch.
Q2) Show me how you would check that the brake lights are working on this car. (I can assist you, if you need to switch the ignition on, please don't start the engine)
A2) Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help. (you may need to switch ignition on, but do not start engine)
Q3) Show me / explain how you would check that the power assisted steering is working before starting a journey.
A3) If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Q4) Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle.
A4) Apply footbrake firmly. Demonstrate by applying parking brake (handbrake) so that when it is fully applied it secures itself, and is not at the end of the working travel.
TIP- Keep the button pressed in when aplying the handbrake so that you do not hear the ratchet noise.
Q5) (Show me) Open the bonnet, identify where you would check the engine oil
Q1) Show me how you would check that the direction indicators are working.
A1) Applying the indicators or hazard warning switch and check functioning of all indicators. (may need to switch ignition on, prompt not to start engine)
TIP- Most cars will not need to have the ignition switched on to activate the hazard switch, so it should be simple to lean into the car, switch it on, walk around the car checking all 4 main indicators (there are also indicators on the front wings and/or the door mirrors), and then lean into the car to switch off the hazard switch.
Q2) Show me how you would check that the brake lights are working on this car. (I can assist you, if you need to switch the ignition on, please don't start the engine)
A2) Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help. (you may need to switch ignition on, but do not start engine)
Q3) Show me / explain how you would check that the power assisted steering is working before starting a journey.
A3) If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Q4) Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle.
A4) Apply footbrake firmly. Demonstrate by applying parking brake (handbrake) so that when it is fully applied it secures itself, and is not at the end of the working travel.
TIP- Keep the button pressed in when aplying the handbrake so that you do not hear the ratchet noise.
Q5) (Show me) Open the bonnet, identify where you would check the engine oil